How to Download and Install Samsung Clone Galaxy A9 Flash File MT6580 5.1 | Firmware | Tested
How to Download and Install Samsung Clone Galaxy A9 Flash File MT6580 5.1 Firmware Tested
If you are looking for a way to flash your Samsung Clone Galaxy A9 device with the latest firmware, you have come to the right place. In this article, we will show you how to download and install the Samsung Clone Galaxy A9 Flash File MT6580 5.1, which is a tested and working firmware for your device.
Samsung Clone Galaxy A9 Flash File MT6580 5.1 | Firmware | Tested
Flashing your device can help you fix various issues, such as bootloop, hang on logo, dead recovery, virus attack, or any software related problem. However, flashing can also cause data loss or damage your device if done incorrectly. Therefore, we advise you to follow the instructions carefully and backup your data before proceeding.
Requirements
A Windows PC or laptop.
A USB cable to connect your device to the PC.
A Samsung Clone Galaxy A9 device with at least 50% battery charge.
The Samsung Clone Galaxy A9 Flash File MT6580 5.1 firmware file. You can download it from here.
The SP Flash Tool software. You can download it from here.
The MTK USB Driver software. You can download it from here.
Steps to Flash Samsung Clone Galaxy A9 Flash File MT6580 5.1
Extract the downloaded firmware file and SP Flash Tool software on your PC.
Install the MTK USB Driver software on your PC.
Run the SP Flash Tool software as administrator.
Click on the "Download" tab and then click on the "Choose" button next to the "Scatter-loading File" option.
Browse and select the scatter file from the extracted firmware folder. It should be named as "MT6580_Android_scatter.txt".
Click on the "Download" button to start the flashing process.
Power off your device and remove the battery if possible.
Connect your device to the PC using the USB cable while holding the volume down or volume up button.
The SP Flash Tool software will detect your device and start flashing it automatically.
Wait for the flashing process to complete. It may take a few minutes depending on the size of the firmware file.
Once the flashing process is done, you will see a green tick mark on the SP Flash Tool software.
Disconnect your device from the PC and insert the battery if removed.
Power on your device and enjoy the new firmware.
Conclusion
We hope this article helped you to download and install the Samsung Clone Galaxy A9 Flash File MT6580 5.1 firmware on your device. This firmware is tested and working for many users, so you can use it without any worries. However, if you face any problem or have any questions, feel free to leave a comment below. We will try our best to help you out. 29c81ba772